ZOLO-C Wax Atomizer Vape Pen Kit

Save 25%
Original Price $ 19.95
Current Price $ 14.95

For the waxy concentrates enthusiasts, Lord Vaper brings you the ZOLO-C, the latest in compact, ultra-affordable 510 thread wax atomizers. Included in the kit are two atomizers, a coil-less ceramic chamber (great for flavorful, smooth hits) and a single-coil Silicon Carbide/Aludirome combination (great for those enjoying strong, big cloud hits). The ZOLO-C is an excellent option for any 510 thread battery, including many of the Lord Vaper products, such as: ZOLO-B, ZOLO-S, etc. Whether you're consuming at home, or on-the-go, the ZOLO-C wax atomizers are the perfect complement to your tool box of medication methods.

Both atomizers operate at a resistance level of 1ohm, which is perfect for generating slightly warm vapor that's easy on the throat and lungs. You'll still want to be careful though, due to the fact that waxy materials are highly-concentrated and should be used with care. 

Atomizer Materials

  • Coil-less Ceramic Atomizer
    • Made from medical/food-grade Ceramic, this atomizer produces clean, pure vapor flavor without harsh hits (i.e., a mellower experience).
    • Heats-up slowly, so you can enjoy the flavor of your material, while getting the benefit of a clean vaporization of your material.
  • Single-coil, Silicon Carbide/Aludirome Atomizer
    • Rod
      • Made from Silicon Carbide (Carborundum), an extremely-durable, naturally-occuring mineral, able to withstand high temperatures and high voltages.
    • Wire
      • Made of Aludirome, a blend of Iron, Chromium and Aluminum, designed to be antioxidative and withstand high temperatures and high voltages.
    • Heats-up very quickly, producing strong clouds of vapor, so be careful and start low-and-slow until you reach the desired effect.

How To Use

To avoid spattering and/or leaking of concentrate material out of the atomizers, it's recommended to use no more than a breadcrumb size material at one time. The goal is to consume all material that's loaded into the atomizer during each session. Overloading with material, and not fully-consuming during a session, will cause build-up to occur, which will degrade performance and flavor during future sessions. General usage guidelines for each Atomizer:

  • Coil-less Ceramic Atomizer
    • Load a breadcrumb size piece of material in the center of the chamber.
    • Ceramic heats-up slowly, so you may want to use the preheat function of your battery before starting to inhale.
    • Voltage setting: recommend ~3.8V
  • Single-coil, Silicon Carbide/Aludirome Atomizer
    • Load a breadcrumb size piece of material onto the top of the coil.
    • Heats-up very quickly, producing strong clouds of vapor, so be careful and start low-and-slow until you reach the desired effect.
    • Voltage setting: novice consumers may want to start with a lower voltage (~3.0V), while a more experienced consumer may enjoy huge clouds and harder hits with voltages ranging 3.4-3.8V.

Care / Maintenance

To ensure the longest life of the atomizers, it's important to have a regular plan for cleaning. Whether you're an infrequent or frequent consumer, residual material build-up will occur, and will eventually require replacing of the atomizer (you'll know when it's time based on a change in flavor). Below is our guideline for maintenance:

  • After each use: If you haven't consumed all material in the atomizer, it's recommended to perform a short dry burn-off, which will help reduce the build-up of material over time. With power turned on, simply press the power button for 10 seconds without inhaling. This process can be repeated a few times depending on the amount of residual material remaining in the atomizer.
  • When noticing residue build-up: place your atomizer in a small cup, then fill with 91% Isopropyl Alcohol (commonly available at Drug Stores) so that the atomizer is completely submerged in alcohol. Let soak for 20-30 minutes, then place on towel to air dry (do not rinse in water). If some residue remains, you can use a Q-Tip to gently wipe around the inside, but avoid pressing on the coil. When completely dry, reassemble all parts, insert into your battery, and perform a dry burn-off by holding the power button for 10 seconds.

Replacement Atomizers

Depending on your usage frequency, it's recommended to replace your atomizers every 1-3 months to maintain the flavor and operation. No matter how well you maintain the cleanliness of the atomizers, they will eventually produce a harsh, and maybe burnt flavor. This is typical of all atomizers of this type. Lord Vaper offers a replacement kit, with qty:3 Aludirome/Silicon Carbide atomizers and qty:1 Coil-less Ceramic atomizer.

Package Contents (Kit)

1x Atomizer #1 - Ceramic (coil-less)

1x Atomizer #2 - Aludirome wire + Silicon Carbide rod + Ceramic chamber base

1x Mouthpiece

1x Short-length magnetic adapter (0.18", use with ZOLO-S)

1x Medium-length magnetic adapter (0.57", use with ZOLO-B)

1x Loading Tool

Package Contents (Replacement)

1x Atomizer #1 - Ceramic (coil-less)

3x Atomizer #2 - Aludirome wire + Silicon Carbide rod + Ceramic chamber base

Product Warranty

Three (3) months workmanship warranty.